- 1982 International 5288 Tractor. Ser: 2580002U003542. 160 Horsepower. 7545 Hours. Engine Rebuilt at 5230 hours. 3 PT Hitch, PTO 1000, Remote 3, Trans Quad 1, and Differential Lock. 7.6L 6 Cylinder Diesel engine. Tractor not used since 2016 season. Runs well and fires up with battery charge. A/C works, yet may need recharge for peak performance. Virtually rust free.
- John Deere 915 7 Shank Ripper
- John Deere Rotary Hoe 28’ width
- John Deere 1600 Chisel Plow. 18’ width. Note: the outside shank is out of alignment.
- John Deere LZ 1010 Drill. 10 inch spacing. (3) 8’ drills. 9 ½ spacing
- International Vibra Shank Chisel Plow
- John Deere Drills
- Grahm Hamey Chisel Plow
- Grain Augers. Top photo: 7”. Approximately 25’. Bottom photo: 6”. Approximately 38'.
- READ Grain Bins. 2 on south end. 18’ diameter. Approximately 16’ tall. Minimum 3500 bushel capacity.
- 2 Fuel Tanks. 500 gallons each
- John Deere One Way
- John Deere Four Bottom Plow
Details
- 1982 International 5288 Tractor. Ser: 2580002U003542. 160 Horsepower. 7545 Hours. Engine Rebuilt at 5230 hours. 3 PT Hitch, PTO 1000, Remote 3, Trans Quad 1, and Differential Lock. 7.6L 6 Cylinder Diesel engine. Tractor not used since 2016 season. Runs well and fires up with battery charge. A/C works, yet may need recharge for peak performance. Virtually rust free.
- John Deere 915 7 Shank Ripper
- John Deere Rotary Hoe 28’ width
- John Deere 1600 Chisel Plow. 18’ width. Note: the outside shank is out of alignment.
- John Deere LZ 1010 Drill. 10 inch spacing. (3) 8’ drills. 9 ½ spacing
- International Vibra Shank Chisel Plow
- John Deere Drills
- Grahm Hamey Chisel Plow
- Grain Augers. Top photo: 7”. Approximately 25’. Bottom photo: 6”. Approximately 38'.
- READ Grain Bins. 2 on south end. 18’ diameter. Approximately 16’ tall. Minimum 3500 bushel capacity.
- 2 Fuel Tanks. 500 gallons each
- John Deere One Way
- John Deere Four Bottom Plow
